EcoFactor Charging station NW Tor EFC DC

Features

1. Control of the charging functions of electrical equipment in supported Mode 3 is provided using a control signal.
2. Management of charging functions of electrical equipment in supported Mode 4 AA configuration is provided by control signals and the CAN digital interface.
3. Management of charging functions of electrical equipment in supported Mode 4 FF configuration is provided by control signals and digital communication.
4. Remote monitoring of the state and control of the operating modes of the military equipment is provided by the support of the OCPP protocol.
5. The charging station provides an undistorted sinusoidal output voltage for Charge Mode 3 and operates across the entire range of output loads, from idle to maximum load.

Technical specifications:

Nominal output power: 80/120/160/240/320/360 kW
Nominal input current (Inom): 160/127/250/500/500/500 A
Covering of the station: powder paint RFID reader (the card allows charging without access to the application or mobile network)
Degree of protection of the shell according to MEK 60529: IP54
Remote control protocol: OCPP 1.6J
Internet access: 4G/3G modem, LAN
Certificate: CE, ISO
Operating temperature: -35 ° C ... +55 ° C
Maximum relative humidity of the environment at 25 ℃: 95%

For the 80 kW variant, the third port is a AC Type-2 socket capable of 22 kW. For the other variants, all of the ports are CCS Combo 2.